POLLRDNORM/POLLWRNORM may be not defined in uClibc, so replace them
with the equivalent POLLIN/POLLOUT.
Refer to https://www.man7.org/linux/man-pages/man2/poll.2.html
POLLRDNORM Equivalent to POLLIN
POLLWRNORM Equivalent to POLLOUT
Signed-off-by: Thomas Devoogdt <thomas.devoogdt@barco.com>
Fix issues in the libc-wasi `poll_oneoff` when thread manager is enabled:
- The exception of a thread may be cleared when other thread runs into
`proc_exit` and then calls `clear_wasi_proc_exit_exception`, so should not
use `wasm_runtime_get_exception` to check whether an exception was
thrown, use `wasm_cluster_is_thread_terminated` instead
- We divided one time poll_oneoff into many times poll_oneoff to check
the exception to avoid long time waiting in previous PR, but if all events
returned by one time poll are all waiting events, we need to continue to
wait but not return directly.
Follow-up on #1951. Tested with multiple timeout values, with and without
interruption and measured the time spent sleeping.
The problem was found by a `Golang + WAMR (as CGO)` wrapped by EGO
in SGX Enclave.
`fstat()` in EGO returns dummy values:
- EGO uses a `mount` configuration to define the mount points that apply
the host file system presented to the Encalve.
- EGO has a different programming model: the entire application runs inside
the enclave. Manual ECALLs/OCALLs by application code are neither
required nor possible.
Add platform ego and add macro control for the return value checking of
`fd_determine_type_rights` in libc-wasi to resolve the issue.
Support to get/set recv_buf_size/send_buf_size/reuse_port/reuse_addr for wasm app
Add socket APIs for esp-idf platform
Add setsockopt for linux-sgx platform
The function was introduced to WASI about half a year ago after it already
existed in WAMR.
It caused problems with compiling `wasi_socket_ext.c` with the wasi-sdk
that already had this hostcall exported (wasi-sdk >= 15).
The approach we take is the following:
- we update WASI interface to be compatible with the wasi_snapshot_preview1
- compilation with `wasi_socket_ext.c` supports both wasi_sdk >= 15 and wasi_sdk < 15
(although we intend to drop support for < 15 at one point of time)
- we override `accept()` from wasi-libc - we do that because `accept()` in `wasi-libc`
doesn't support returning address (as it doesn't have `getpeername()` implemented),
so `wasi_socket_ext.c` offers more functionality right now
Resolves#1167 and #1528.
[1] https://github.com/WebAssembly/WASI/blob/main/phases/snapshot/witx/wasi_snapshot_preview1.witx
Implement more socket APIs, refer to #1336 and below PRs:
- Implement wasi_addr_resolve function (#1319)
- Fix socket-api byte order issue when host/network order are the same (#1327)
- Enhance sock_addr_local syscall (#1320)
- Implement sock_addr_remote syscall (#1360)
- Add support for IPv6 in WAMR (#1411)
- Implement ns lookup allowlist (#1420)
- Implement sock_send_to and sock_recv_from system calls (#1457)
- Added http downloader and multicast socket options (#1467)
- Fix `bind()` calls to receive the correct size of `sockaddr` structure (#1490)
- Assert on correct parameters (#1505)
- Copy only received bytes from socket recv buffer into the app buffer (#1497)
Co-authored-by: Marcin Kolny <mkolny@amazon.com>
Co-authored-by: Marcin Kolny <marcin.kolny@gmail.com>
Co-authored-by: Callum Macmillan <callumimacmillan@gmail.com>
esp-idf: Make esp-idf support Libc WASI
1. Support to get WASM APP libs' DIR from upper layer
2. Add SSP support for esp-idf platform
3. Change the errno of readlinkat
The existing validation didn't work as expected; e.g. for address
pool: 8.8.8.8/24 the application had access to the 127.0.0.1 address (which
should not).
Fix the following warning introduced by the recent change.
```
In file included from wamr/core/iwasm/libraries/libc-wasi/sandboxed-system-primitives/src/locking.h:17,
from wamr/core/iwasm/libraries/libc-wasi/sandboxed-system-primitives/src/posix.h:18,
from wamr/core/iwasm/aot/../common/wasm_runtime_common.h:18,
from wamr/core/iwasm/aot/aot_runtime.h:10,
from wamr/core/iwasm/aot/aot_loader.c:6:
wamr/core/iwasm/libraries/libc-wasi/sandboxed-system-primitives/src/ssp_config.h:55: error: "CONFIG_HAS_ISATTY" redefined [-Werror]
#define CONFIG_HAS_ISATTY 1
In file included from wamr/core/shared/utils/../platform/include/platform_common.h:13,
from wamr/core/shared/utils/bh_platform.h:9,
from wamr/core/iwasm/aot/aot_runtime.h:9,
from wamr/core/iwasm/aot/aot_loader.c:6:
wamr/core/shared/platform/nuttx/platform_internal.h:75: note: this is the location of the previous definition
#define CONFIG_HAS_ISATTY 0
```
Re-implement socket api send/recv in an atomic-like way, fix the return value
check in posix.c.
And fix wasm-c-api sample callback_chain calling malloc issue.
wasm_c_api.c: add more checks, fix LOG_WARNING invalid specifier
aot_emit_aot_file: fix strncpy max size length to copy
posix.c: fix potential socket not close issue
wasm-c-api samples: add return value checks for fseek/ftell
cJSON.c: remove dead code
Fix compile warnings in libc-wasi posix.c:
```
posix.c:880:41: warning: comparison of integers of different signs:
'unsigned long' and 'ssize_t' (aka 'long') [-Wsign-compare]
if (bufoff + iov[i].buf_len < len) {
posix.c:1359:32: warning: comparison of integers of different signs:
'off_t' (aka 'long long') and 'unsigned long long' [-Wsign-compare]
if (ret == 0 && sb.st_size < offset + len)
```
Refer to [Networking API design](https://github.com/WebAssembly/WASI/issues/370)
and [feat(socket): berkeley socket API v2](https://github.com/WebAssembly/WASI/pull/459):
- Support the socket API of synchronous mode, including `socket/bind/listen/accept/send/recv/close/shutdown`,
the asynchronous mode isn't supported yet.
- Support adding `--addr-pool=<pool1,pool2,..>` argument for command line to identify the valid ip address range
- Add socket-api sample and update the document
Fix __wasi_subscription_t structure definition inconsistent with wasi-libc
definition issue, reported by #961, tested with sleep, poll API and other
wasi cases on x86-64, x86-32 and arm32 targets.
Apply clang-format for core/iwasm/compilation and core/iwasm/libraries files.
Add wasm-c-api empty_imports sample to workflow test.
And enable triggering workflow when core/config.h changes.
Some libc APIs required by wasi native lib are missing in some Android API versions, only when the version >= 24, all APIs are supported. Add the missing APIs in android platform layer, leave them empty, report error and return failed if they are called. Also update CMakeLists.txt to enable libc wasi by default.
Co-authored-by: Wenyong Huang <wenyong.huang@intel.com>
Enable to use BH_VPRINTF macro for platform Linux/Windows/Darwin/VxWorks to redirect the stdout output from platform os_printf/os_vprintf, or the wasi output from wasm app to the vprintf like callback function specified by BH_VPRINTF macro of cmake WAMR_BH_VPRINTF variable.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
In some platforms, allocating memory with size 0 may return NULL but not an empty memory block, which causes runtime load, instantiate or execute wasm/aot file failed. We add checks to try to avoid allocating memory in runtime if the size is 0. And in wasm_runtime_malloc/free, output warning if allocate memory with size 0 and free memory with NULL ptr.
Also fix some coding style issues, fix handle riscv32 ilp32d issue, and fix several wasm-c-api issues.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Update wasm app build scripts for wasi-sdk-12.0: add --export=__main_argc_argv, remove --no-threads
Lookup function with name "__main_argc_argv" as main function besides "main"
Change module_malloc to runtime_malloc in wasi native lib
Refine classic interpreter op_block and op_br_table
Refine faster interpreter op_br_table
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
add more checks to enhance security
clear "wasi proc exit" exception before return to caller in wasm/aot call functions
fix memory profiling issue
change movdqa to movdqu in simd invokeNative asm codes to fix issue of unaligned address access
move setjmp/longjmp from libc-builtin to libc-emcc
fix zephyr platform compilation issue in latest zephyr version
Fix the build issues on mac for basic/multi-module/multi-thread/
simple/spawn-thread/wasm-c-api under samples.
And all these samples could be run as expected.
Signed-off-by: Xiaokang Qin <xiaokang.qxk@antgroup.com>
Update all links accordingly. Also update links to other repositories
whose branches have renamed.
The references to repositories whose branches have not renamed should be
referencing specific commits anyway, so reference those specific commits
by hash.
