Currently, `data.drop` instruction is implemented by directly modifying the
underlying module. It breaks use cases where you have multiple instances
sharing a single loaded module. `elem.drop` has the same problem too.
This PR fixes the issue by keeping track of which data/elem segments have
been dropped by using bitmaps for each module instances separately, and
add a sample to demonstrate the issue and make the CI run it.
Also add a missing check of dropped elements to the fast-jit `table.init`.
Fixes: https://github.com/bytecodealliance/wasm-micro-runtime/issues/2735
Fixes: https://github.com/bytecodealliance/wasm-micro-runtime/issues/2772
Fixed a bug in the processing of the br_table_cache opcode that caused out-of-range
references when the label index was greater than the length of the label.
Avoid the stack traces getting mixed up together when multi-threading is enabled
by using exception_lock/unlock in dumping the call stacks.
And remove duplicated call stack dump in wasm_application.c.
Also update coding guideline CI to fix the clang-format-12 not found issue.
- Inherit shared memory from the parent instance, instead of
trying to look it up by the underlying module. The old method
works correctly only when every cluster uses different module.
- Use reference count in WASMMemoryInstance/AOTMemoryInstance
to mark whether the memory is shared or not
- Retire WASMSharedMemNode
- For atomic opcode implementations in the interpreters, use
a global lock for now
- Update the internal API users
(wasi-threads, lib-pthread, wasm_runtime_spawn_thread)
Fixes https://github.com/bytecodealliance/wasm-micro-runtime/issues/1962
We have observed a significant performance degradation after merging
https://github.com/bytecodealliance/wasm-micro-runtime/pull/1991
Instead of protecting suspend flags with a mutex, we implement the flags
as atomic variable and only use mutex when atomics are not available
on a given platform.
Allow to use `cmake -DWAMR_CONFIGURABLE_BOUNDS_CHECKS=1` to
build iwasm, and then run `iwasm --disable-bounds-checks` to disable the
memory access boundary checks.
And add two APIs:
`wasm_runtime_set_bounds_checks` and `wasm_runtime_is_bounds_checks_enabled`
Segue is an optimization technology which uses x86 segment register to store
the WebAssembly linear memory base address, so as to remove most of the cost
of SFI (Software-based Fault Isolation) base addition and free up a general
purpose register, by this way it may:
- Improve the performance of JIT/AOT
- Reduce the footprint of JIT/AOT, the JIT/AOT code generated is smaller
- Reduce the compilation time of JIT/AOT
This PR uses the x86-64 GS segment register to apply the optimization, currently
it supports linux and linux-sgx platforms on x86-64 target. By default it is disabled,
developer can use the option below to enable it for wamrc and iwasm(with LLVM
JIT enabled):
```bash
wamrc --enable-segue=[<flags>] -o output_file wasm_file
iwasm --enable-segue=[<flags>] wasm_file [args...]
```
`flags` can be:
i32.load, i64.load, f32.load, f64.load, v128.load,
i32.store, i64.store, f32.store, f64.store, v128.store
Use comma to separate them, e.g. `--enable-segue=i32.load,i64.store`,
and `--enable-segue` means all flags are added.
Acknowledgement:
Many thanks to Intel Labs, UC San Diego and UT Austin teams for introducing this
technology and the great support and guidance!
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Co-authored-by: Vahldiek-oberwagner, Anjo Lucas <anjo.lucas.vahldiek-oberwagner@intel.com>
Add nightly (UTC time) checks with asan and ubsan, and also put gcc-4.8 build
to nightly run since we don't need to run it with every PR.
Co-authored-by: Maksim Litskevich <makslit@amazon.co.uk>
Load memory data size in each time memory access boundary check in
multi-threading mode since it may be changed by other threads when
memory growing.
And use `memory->memory_data_size` instead of
`memory->num_bytes_per_page * memory->cur_page_count` to refine
the code.
Use the shared memory's shared_mem_lock to lock the whole atomic.wait and
atomic.notify processes, and use it for os_cond_reltimedwait and os_cond_notify,
so as to make the whole processes actual atomic operations:
the original implementation accesses the wait address with shared_mem_lock
and uses wait_node->wait_lock for os_cond_reltimedwait, which is not an atomic
operation.
And remove the unnecessary wait_map_lock and wait_lock, since the whole
processes are already locked by shared_mem_lock.
- Implement atomic.fence to ensure a proper memory synchronization order
- Destroy exec_env_singleton first in wasm/aot deinstantiation
- Change terminate other threads to wait for other threads in
wasm_exec_env_destroy
- Fix detach thread in thread_manager_start_routine
- Fix duplicated lock cluster->lock in wasm_cluster_cancel_thread
- Add lib-pthread and lib-wasi-threads compilation to Windows CI
Raising "wasi proc exit" exception, spreading it to other threads and then
clearing it in all threads may result in unexpected behavior: the sub thread
may end first, handle the "wasi proc exit" exception and clear exceptions
of other threads, including the main thread. And when main thread's
exception is cleared, it may continue to run and throw "unreachable"
exception. This also leads to some assertion failed.
Ignore exception spreading for "wasi proc exit" and don't clear exception
of other threads to resolve the issue.
And add suspend flag check after atomic wait since the atomic wait may
be notified by other thread when exception occurs.
The start/initialize functions of wasi module are to do some initialization work
during instantiation, which should be only called one time in the instantiation
of main instance. For example, they may initialize the data in linear memory,
if the data is changed later by the main instance, and re-initialized again by
the child instance, unexpected behaviors may occur.
And clear a shadow warning in classic interpreter.
Multiple threads generated from the same module should use the same
lock to protect the atomic operations.
Before this PR, each thread used a different lock to protect atomic
operations (e.g. atomic add), making the lock ineffective.
Fix#1958.
Enable setting running mode when executing a wasm bytecode file
- Four running modes are supported: interpreter, fast-jit, llvm-jit and multi-tier-jit
- Add APIs to set/get the default running mode of the runtime
- Add APIs to set/get the running mode of a wasm module instance
- Add running mode options for iwasm command line tool
And add size/opt level options for LLVM JIT
Implement 2-level Multi-tier JIT engine: tier-up from Fast JIT to LLVM JIT to
get quick cold startup by Fast JIT and better performance by gradually
switching to LLVM JIT when the LLVM JIT functions are compiled by the
backend threads.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1302
Allow to add watchpoints to variables for source debugging. For instance:
`breakpoint set variable var`
will pause WAMR execution when the address at var is written to.
Can also set read/write watchpoints by passing r/w flags. This will pause
execution when the address at var is read:
`watchpoint set variable -w read var`
Add two linked lists for read/write watchpoints. When the debug message
handler receives a watchpoint request, it adds/removes to one/both of these
lists. In the interpreter, when an address is read or stored to, check whether
the address is in these lists. If so, throw a sigtrap and suspend the process.
When a wasm module is duplicated instantiated with wasm_instance_new,
the function import info of the previous instantiation may be overwritten by
the later instantiation, which may cause unexpected behavior.
Store the function import info into the module instance to fix the issue.
Limit max_stack_cell_num/max_csp_num to be no larger than UINT16_MAX,
and don't check all_cell_num in interpreter again.
And refine some codes in interpreter.
Add a new options to control the native stack hw bound check feature:
- Besides the original option `cmake -DWAMR_DISABLE_HW_BOUND_CHECK=1/0`,
add a new option `cmake -DWAMR_DISABLE_STACK_HW_BOUND_CHECK=1/0`
- When the linear memory hw bound check is disabled, the stack hw bound check
will be disabled automatically, no matter what the input option is
- When the linear memory hw bound check is enabled, the stack hw bound check
is enabled/disabled according to the value of input option
- Besides the original option `--bounds-checks=1/0`, add a new option
`--stack-bounds-checks=1/0` for wamrc
Refer to: https://github.com/bytecodealliance/wasm-micro-runtime/issues/1677
Refactor the layout of interpreter and AOT module instance:
- Unify the interp/AOT module instance, use the same WASMModuleInstance/
WASMMemoryInstance/WASMTableInstance data structures for both interpreter
and AOT
- Make the offset of most fields the same in module instance for both interpreter
and AOT, append memory instance structure, global data and table instances to
the end of module instance for interpreter mode (like AOT mode)
- For extra fields in WASM module instance, use WASMModuleInstanceExtra to
create a field `e` for interpreter
- Change the LLVM JIT module instance creating process, LLVM JIT uses the WASM
module and module instance same as interpreter/Fast-JIT mode. So that Fast JIT
and LLVM JIT can access the same data structures, and make it possible to
implement the Multi-tier JIT (tier-up from Fast JIT to LLVM JIT) in the future
- Unify some APIs: merge some APIs for module instance and memory instance's
related operations (only implement one copy)
Note that the AOT ABI is same, the AOT file format, AOT relocation types, how AOT
code accesses the AOT module instance and so on are kept unchanged.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1384
And enable classic interpreter instead fast interpreter when llvm jit is enabled,
so as to fix the issue that llvm jit cannot handle opcode drop_64/select_64.
Normalize wasm types, for the two wasm types, if their parameter types
and result types are the same, we only save one copy, so as to reduce
the footprint and simplify the type comparison in opcode CALL_INDIRECT.
And fix issue in interpreter globals_instantiate, and remove used codes.
Fix dump call stack issue in interpreter introduced by hw bound check:
the call stack isn't dumped if the exception is thrown and caught by
signal handler.
And restore the wasm stack frame to the original status after calling a
wasm function.
Import WAMR Fast JIT which is a lightweight JIT with quick startup, small footprint,
relatively good performance (~40% to ~50% of LLVM JIT) and good portability.
Platforms supported: Linux, MacOS and Linux SGX.
Arch supported: x86-64.
Fix build script to enable hw bound check for interpreter when
AOT is disabled, so as to enable spec cases test for interp with
hw bound check. And fix the issues found.
Implement boundary check with hardware trap for interpreter on
64-bit platforms:
- To improve the performance of interpreter and Fast JIT
- To prepare for multi-tier compilation for the feature
Linux/MacOS/Windows 64-bit are enabled.
Sub module's auxiliary stack boundary and bottom may be different from
main module's counterpart, so when calling sub module, its aux stack info
should be gotten and set to exec_env firstly, or aux stack overflow and out
of bounds memory access exception may be thrown when calling sub
module's function.
Fix the issue reported in PR #1278.
