compilation on macos / build_samples_wasm_c_api ($CLASSIC_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_wasm_c_api ($FAST_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_arm_macos.outputs.cache_key }}, macos-14, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-s… (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_intel_macos.outputs.cache_key }}, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi… (push) Has been cancelled
- Implement TINY / STANDARD frame modes - tiny mode is only able to keep track on the IP
and func idx, STANDARD mode provides more capabilities (parameters, stack pointer etc.).
- Implement FRAME_PER_FUNCTION / FRAME_PER_CALL modes - frame per function adds
code at the beginning and at the end of each function for allocating / deallocating stack frame,
whereas in per-call mode the frame is allocated before each call. The exception is call to
the imported function, where frame-per-function mode also allocates the stack before the
`call` instruction (as it can't instrument the imported function).
At the moment TINY + FRAME_PER_FUNCTION is automatically enabled in case GC and perf
profiling are disabled and `values` call stack feature is not requested. In all the other cases
STANDARD + FRAME_PER_CALL is used.
STANDARD + FRAME_PER_FUNCTION and TINY + FRAME_PER_CALL are currently not
implemented but possible, and might be enabled in the future.
ps. https://github.com/bytecodealliance/wasm-micro-runtime/issues/3758
compilation on macos / build_samples_wasm_c_api ($CLASSIC_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_wasm_c_api ($FAST_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_arm_macos.outputs.cache_key }}, macos-14, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-s… (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_intel_macos.outputs.cache_key }}, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi… (push) Has been cancelled
compilation on macos / build_samples_wasm_c_api ($CLASSIC_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_wasm_c_api ($FAST_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_arm_macos.outputs.cache_key }}, macos-14, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-s… (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_intel_macos.outputs.cache_key }}, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi… (push) Has been cancelled
In the AOT compiler, allow the user to control stack boundary check when the boundary
check is enabled (e.g. `wamrc --bounds-checks=1`). Now the code logic is:
1. When `--stack-bounds-checks` is not set, it will be the same value as `--bounds-checks`.
2. When `--stack-bounds-checks` is set, it will be the option value no matter what the
status of `--bounds-checks` is.
compilation on macos / build_samples_wasm_c_api ($CLASSIC_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_wasm_c_api ($FAST_INTERP_BUILD_OPTIONS, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-sdk-20/wasi-sdk-20.0-macos.tar.gz) (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_arm_macos.outputs.cache_key }}, macos-14, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi-s… (push) Has been cancelled
compilation on macos / build_samples_others (${{ needs.build_llvm_libraries_on_intel_macos.outputs.cache_key }}, macos-13, https://github.com/WebAssembly/wabt/releases/download/1.0.31/wabt-1.0.31-macos-12.tar.gz, https://github.com/WebAssembly/wasi-sdk/releases/download/wasi… (push) Has been cancelled
Make wamrc normalize "arm64" to "aarch64v8". Previously the only way to
make the "arm64" target was to not specify a target on 64 bit arm-based
mac builds. Now arm64 and aarch64v8 are treated as the same.
Make aot_loader accept "aarch64v8" on arm-based apple (as well as
accepting legacy "arm64" based aot targets).
This also removes __APPLE__ and __MACH__ from the block that defaults
size_level to 1 since it doesn't seem to be supported for aarch64:
`LLVM ERROR: Only small, tiny and large code models are allowed on AArch64`
This allows users to specify llvm command line options, similarly to clang's -mllvm option.
My motivations:
* -debug and friends
* -mtext-section-literals for xtensa
Implement the GC (Garbage Collection) feature for interpreter mode,
AOT mode and LLVM-JIT mode, and support most features of the latest
spec proposal, and also enable the stringref feature.
Use `cmake -DWAMR_BUILD_GC=1/0` to enable/disable the feature,
and `wamrc --enable-gc` to generate the AOT file with GC supported.
And update the AOT file version from 2 to 3 since there are many AOT
ABI breaks, including the changes of AOT file format, the changes of
AOT module/memory instance layouts, the AOT runtime APIs for the
AOT code to invoke and so on.
Allow to invoke the quick call entry wasm_runtime_quick_invoke_c_api_import to
call the wasm-c-api import functions to speedup the calling process, which reduces
the data copying.
Use `wamrc --invoke-c-api-import` to generate the optimized AOT code, and set
`jit_options->quick_invoke_c_api_import` true in wasm_engine_new when LLVM JIT
is enabled.
And refactor the original perf support
- use WAMR_BUILD_LINUX_PERF as the cmake compilation control
- use WASM_ENABLE_LINUX_PERF as the compiler macro
- use `wamrc --enable-linux-perf` to generate aot file which contains fp operations
- use `iwasm --enable-linux-perf` to create perf map for `perf record`
LLVM PGO (Profile-Guided Optimization) allows the compiler to better optimize code
for how it actually runs. This PR implements the AOT static PGO, and is tested on
Linux x86-64 and x86-32. The basic steps are:
1. Use `wamrc --enable-llvm-pgo -o <aot_file_of_pgo> <wasm_file>`
to generate an instrumented aot file.
2. Compile iwasm with `cmake -DWAMR_BUILD_STATIC_PGO=1` and run
`iwasm --gen-prof-file=<raw_profile_file> <aot_file_of_pgo>`
to generate the raw profile file.
3. Run `llvm-profdata merge -output=<profile_file> <raw_profile_file>`
to merge the raw profile file into the profile file.
4. Run `wamrc --use-prof-file=<profile_file> -o <aot_file> <wasm_file>`
to generate the optimized aot file.
5. Run the optimized aot_file: `iwasm <aot_file>`.
The test scripts are also added for each benchmark, run `test_pgo.sh` under
each benchmark's folder to test the AOT static pgo.
Segue is an optimization technology which uses x86 segment register to store
the WebAssembly linear memory base address, so as to remove most of the cost
of SFI (Software-based Fault Isolation) base addition and free up a general
purpose register, by this way it may:
- Improve the performance of JIT/AOT
- Reduce the footprint of JIT/AOT, the JIT/AOT code generated is smaller
- Reduce the compilation time of JIT/AOT
This PR uses the x86-64 GS segment register to apply the optimization, currently
it supports linux and linux-sgx platforms on x86-64 target. By default it is disabled,
developer can use the option below to enable it for wamrc and iwasm(with LLVM
JIT enabled):
```bash
wamrc --enable-segue=[<flags>] -o output_file wasm_file
iwasm --enable-segue=[<flags>] wasm_file [args...]
```
`flags` can be:
i32.load, i64.load, f32.load, f64.load, v128.load,
i32.store, i64.store, f32.store, f64.store, v128.store
Use comma to separate them, e.g. `--enable-segue=i32.load,i64.store`,
and `--enable-segue` means all flags are added.
Acknowledgement:
Many thanks to Intel Labs, UC San Diego and UT Austin teams for introducing this
technology and the great support and guidance!
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Co-authored-by: Vahldiek-oberwagner, Anjo Lucas <anjo.lucas.vahldiek-oberwagner@intel.com>
Add a new options to control the native stack hw bound check feature:
- Besides the original option `cmake -DWAMR_DISABLE_HW_BOUND_CHECK=1/0`,
add a new option `cmake -DWAMR_DISABLE_STACK_HW_BOUND_CHECK=1/0`
- When the linear memory hw bound check is disabled, the stack hw bound check
will be disabled automatically, no matter what the input option is
- When the linear memory hw bound check is enabled, the stack hw bound check
is enabled/disabled according to the value of input option
- Besides the original option `--bounds-checks=1/0`, add a new option
`--stack-bounds-checks=1/0` for wamrc
Refer to: https://github.com/bytecodealliance/wasm-micro-runtime/issues/1677
Fix multi-module issue:
don't call the sub module's function with "$sub_module_name$func_name"
Fix the aot_call_function free argv1 issue
Modify some API comments in wasm_export.h
Fix the wamrc help info
Use the semantic versioning (https://semver.org) to replace the current date
versioning system, which is more general and is requested by some developers,
e.g. issue #1357.
There are three parts in the new version string:
- major. Any incompatible modification on ABIs and APIs will lead to an increment
in the value of major, which mainly includes: AOT calling conventions, AOT file
format, wasm_export.h, wasm_c_api.h, and so on.
- minor. It represents new features, including MVP/POST-MVP features, libraries,
WAMR private ones, and so one.
- patch. It represents patches.
The new version will start from 1.0.0. Update the help info and version showing for
iwasm and wamrc.
Enable running XIP file on Windows platform.
And add more strict checks for wamrc to report error when the input file
is same with output file, or the input file is AOT file but not wasm file.
Fix some issues on MacOS platform
- Enable libc-wasi by default
- Set target abi to "gnu" if it is not set for wamrc to avoid generating
object file of unsupported Mach-O format
- Set `<vendor>-<sys>` info according to target abi for wamrc to support
generating AOT file for other OSs but not current host
- Set cpu name if arch/abi/cpu are not set to avoid checking SIMD
capability failed
- Set size level to 1 for MacOS/Windows platform to avoid relocation type
unsupported warning
- Clear posix_memmap.c compiling warning
- Fix spec case test script issues, enable test spec cases on MacOS
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Enable ref types feature and bulk memory feature by default for wamrc
and provide "--disable-ref-types", "--disable-bulk-memory" to disable
them.
And remove the ref_type_flag option in wasm_loader.c which is used to
control whether to enable ref types or not when ENABLE_REF_TYPES
macro is enabled in wamrc. As the wasm binary format with ref types
is compatible with the binary format before, we can remove the option.
Also update the spec test scripts.
Enable LLVM link time optimization for AOT and enable it by default,
and provide "wamrc --disable-llvm-lto" option to disable it.
And modify the spec test script, disable it by default when testing
spec cases.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Apply clang-format for C source files in folder core/app-mgr,
core/app-framework, and test-tools.
And rename folder component_test to component-test, update
zephyr build document.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Implement source debugging feature for classic interpreter and AOT:
- use `cmake -DWAMR_BUILD_DEBUG_INTERP=1` to enable interpreter debugging
- use `cmake -DWAMR_BUILD_DEBUG_AOT=1` to enable AOT debugging
See doc/source_debugging.md for more details.
Implement XIP (Execution In Place) feature for AOT mode to enable running the AOT code inside AOT file directly, without memory mapping the executable memory for AOT code and applying relocations for text section. Developer can use wamrc with "--enable-indirect-mode --disable-llvm-intrinsics" flags to generate the AOT file and run iwasm with "--xip" flag. Known issues: there might still be some relocations in the text section which access the ".rodata" like sections.
And also enable ARC target support for both interpreter mode and AOT mode.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Enable RISCV AOT support, the supported ABIs are LP64 and LP64D for riscv64, ILP32 and ILP32D for riscv32.
For wamrc:
use --target=riscv64/riscv32 to specify the target arch of output AOT file,
use --target-abi=lp64d/lp64/ilp32d/ilp32 to specify the target ABI,
if --target-abi isn't specified, by default lp64d is used for riscv64, and ilp32d is used for riscv32.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Co-authored-by: wenyongh <wenyong.huang@intel.com>
Implement spec reference-types proposal for interpreter, AOT and JIT, update documents and add sample. And upgrade AOT_CURRENT_VERSION to 3 as AOT file format and AOT module instance layout are changed.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Enable SIMD by default for wamrc on x86-64 target, for iwasm on platform Linux and Darwin. And update build wamr document, fix app manager compile warning.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
And remove redundant FAST_INTERP macros in wasm_interp_fast.c, and fix wamrc --help wrong line order issue.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
add more checks to enhance security
clear "wasi proc exit" exception before return to caller in wasm/aot call functions
fix memory profiling issue
change movdqa to movdqu in simd invokeNative asm codes to fix issue of unaligned address access
move setjmp/longjmp from libc-builtin to libc-emcc
fix zephyr platform compilation issue in latest zephyr version
Also implement native stack overflow check with hardware trap for 64-bit platforms
Refine classic interpreter and fast interpreter to improve performance
Update document
