Apply patches which were fixed branch main to branch `release/1.3.x`:
- zephyr: Use zephyr sys_cache instead of CMSIS (#3162)
- Fix llvm jit push funcref/externref result type issue (#3169)
- Fix inconsistent coding convention (#3171)
- VSCode IDE enhancement and readme update (#3172)
- zephyr: include math only with minimal libc (#3177)
- Fix wasm loader handling opcode br_table (#3176)
- Specify language in the wasi socket ext project (#3183)
- lldb_function_to_function_dbi: Fix a null dereference (#3189)
- Fix LLVM assertion failure and update CONTRIBUTING.md (#3197)
- lldb_function_to_function_dbi: A hack to avoid crashing on C++ methods (#3190)
- Fix compilation errors on MinGW (#3217)
- Fix compilation errors on esp-idf platform (#3224)
- Fix aot relocation symbols not found on windows 32-bit (#3231)
- Fix nightly run tsan ASLR issue (#3233)
- Go binding: Change C.long to C.int64_t when call wasm_runtime_set_wasi_args_ex (#3235)
- posix_file.c: Correct the dirfd argument that passes to fstatat (#3244)
- Fix compilation errors on zephyr platform (#3255)
- Fix dynamic offset not updated in op_br for block with ret type (#3269)
- Fix CI error when install packages for macos-14 (#3270)
This PR adds the initial support for WASM exception handling:
* Inside the classic interpreter only:
* Initial handling of Tags
* Initial handling of Exceptions based on W3C Exception Proposal
* Import and Export of Exceptions and Tags
* Add `cmake -DWAMR_BUILD_EXCE_HANDLING=1/0` option to enable/disable
the feature, and by default it is disabled
* Update the wamr-test-suites scripts to test the feature
* Additional CI/CD changes to validate the exception spec proposal cases
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1884587513f3c68bebfe9ad759bccdfed8
Signed-off-by: Ricardo Aguilar <ricardoaguilar@siemens.com>
Co-authored-by: Chris Woods <chris.woods@siemens.com>
Co-authored-by: Rene Ermler <rene.ermler@siemens.com>
Co-authored-by: Trenner Thomas <trenner.thomas@siemens.com>
Though SIMD isn't supported by interpreter, when JIT is enabled,
developer may run `iwasm --interp <wasm_file>` to trigger the SIMD
opcode in interpreter, which isn't handled before this PR.
- Enable quick aot entry when hw bound check is disabled
- Remove unnecessary ret_type argument in the quick aot entries
- Declare detailed prototype of aot function to call in each quick aot entry
Enhance the statistic of wasm function execution time, or the performance
profiling feature:
- Add os_time_thread_cputime_us() to get the cputime of a thread,
and use it to calculate the execution time of a wasm function
- Support the statistic of the children execution time of a function,
and dump it in wasm_runtime_dump_perf_profiling
- Expose two APIs:
wasm_runtime_sum_wasm_exec_time
wasm_runtime_get_wasm_func_exec_time
And rename os_time_get_boot_microsecond to os_time_get_boot_us.
In some scenarios there may be lots of callings to AOT/JIT functions from the
host embedder, which expects good performance for the calling process, while
in the current implementation, runtime calls the wasm_runtime_invoke_native
to prepare the array of registers and stacks for the invokeNative assemble code,
and the latter then puts the elements in the array to physical registers and
native stacks and calls the AOT/JIT function, there may be many data copying
and handlings which impact the performance.
This PR registers some quick AOT/JIT entries for some simple wasm signatures,
and let runtime call the entry to directly invoke the AOT/JIT function instead of
calling wasm_runtime_invoke_native, which speedups the calling process.
We may extend the mechanism next to allow the developer to register his quick
AOT/JIT entries to speedup the calling process of invoking the AOT/JIT functions
for some specific signatures.
- Don't allocate the implicit/unused frame when calling the LLVM JIT function
- Don't set exec_env's thread handle and stack boundary in the recursive
calling from host, since they have been set in the first time calling
- Fix frame not freed in llvm_jit_call_func_bytecode
Currently, `data.drop` instruction is implemented by directly modifying the
underlying module. It breaks use cases where you have multiple instances
sharing a single loaded module. `elem.drop` has the same problem too.
This PR fixes the issue by keeping track of which data/elem segments have
been dropped by using bitmaps for each module instances separately, and
add a sample to demonstrate the issue and make the CI run it.
Also add a missing check of dropped elements to the fast-jit `table.init`.
Fixes: https://github.com/bytecodealliance/wasm-micro-runtime/issues/2735
Fixes: https://github.com/bytecodealliance/wasm-micro-runtime/issues/2772
Fixed a bug in the processing of the br_table_cache opcode that caused out-of-range
references when the label index was greater than the length of the label.
Avoid the stack traces getting mixed up together when multi-threading is enabled
by using exception_lock/unlock in dumping the call stacks.
And remove duplicated call stack dump in wasm_application.c.
Also update coding guideline CI to fix the clang-format-12 not found issue.
- Inherit shared memory from the parent instance, instead of
trying to look it up by the underlying module. The old method
works correctly only when every cluster uses different module.
- Use reference count in WASMMemoryInstance/AOTMemoryInstance
to mark whether the memory is shared or not
- Retire WASMSharedMemNode
- For atomic opcode implementations in the interpreters, use
a global lock for now
- Update the internal API users
(wasi-threads, lib-pthread, wasm_runtime_spawn_thread)
Fixes https://github.com/bytecodealliance/wasm-micro-runtime/issues/1962
We have observed a significant performance degradation after merging
https://github.com/bytecodealliance/wasm-micro-runtime/pull/1991
Instead of protecting suspend flags with a mutex, we implement the flags
as atomic variable and only use mutex when atomics are not available
on a given platform.
Allow to use `cmake -DWAMR_CONFIGURABLE_BOUNDS_CHECKS=1` to
build iwasm, and then run `iwasm --disable-bounds-checks` to disable the
memory access boundary checks.
And add two APIs:
`wasm_runtime_set_bounds_checks` and `wasm_runtime_is_bounds_checks_enabled`
Segue is an optimization technology which uses x86 segment register to store
the WebAssembly linear memory base address, so as to remove most of the cost
of SFI (Software-based Fault Isolation) base addition and free up a general
purpose register, by this way it may:
- Improve the performance of JIT/AOT
- Reduce the footprint of JIT/AOT, the JIT/AOT code generated is smaller
- Reduce the compilation time of JIT/AOT
This PR uses the x86-64 GS segment register to apply the optimization, currently
it supports linux and linux-sgx platforms on x86-64 target. By default it is disabled,
developer can use the option below to enable it for wamrc and iwasm(with LLVM
JIT enabled):
```bash
wamrc --enable-segue=[<flags>] -o output_file wasm_file
iwasm --enable-segue=[<flags>] wasm_file [args...]
```
`flags` can be:
i32.load, i64.load, f32.load, f64.load, v128.load,
i32.store, i64.store, f32.store, f64.store, v128.store
Use comma to separate them, e.g. `--enable-segue=i32.load,i64.store`,
and `--enable-segue` means all flags are added.
Acknowledgement:
Many thanks to Intel Labs, UC San Diego and UT Austin teams for introducing this
technology and the great support and guidance!
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Co-authored-by: Vahldiek-oberwagner, Anjo Lucas <anjo.lucas.vahldiek-oberwagner@intel.com>
Add nightly (UTC time) checks with asan and ubsan, and also put gcc-4.8 build
to nightly run since we don't need to run it with every PR.
Co-authored-by: Maksim Litskevich <makslit@amazon.co.uk>
Load memory data size in each time memory access boundary check in
multi-threading mode since it may be changed by other threads when
memory growing.
And use `memory->memory_data_size` instead of
`memory->num_bytes_per_page * memory->cur_page_count` to refine
the code.
Use the shared memory's shared_mem_lock to lock the whole atomic.wait and
atomic.notify processes, and use it for os_cond_reltimedwait and os_cond_notify,
so as to make the whole processes actual atomic operations:
the original implementation accesses the wait address with shared_mem_lock
and uses wait_node->wait_lock for os_cond_reltimedwait, which is not an atomic
operation.
And remove the unnecessary wait_map_lock and wait_lock, since the whole
processes are already locked by shared_mem_lock.
- Implement atomic.fence to ensure a proper memory synchronization order
- Destroy exec_env_singleton first in wasm/aot deinstantiation
- Change terminate other threads to wait for other threads in
wasm_exec_env_destroy
- Fix detach thread in thread_manager_start_routine
- Fix duplicated lock cluster->lock in wasm_cluster_cancel_thread
- Add lib-pthread and lib-wasi-threads compilation to Windows CI
Raising "wasi proc exit" exception, spreading it to other threads and then
clearing it in all threads may result in unexpected behavior: the sub thread
may end first, handle the "wasi proc exit" exception and clear exceptions
of other threads, including the main thread. And when main thread's
exception is cleared, it may continue to run and throw "unreachable"
exception. This also leads to some assertion failed.
Ignore exception spreading for "wasi proc exit" and don't clear exception
of other threads to resolve the issue.
And add suspend flag check after atomic wait since the atomic wait may
be notified by other thread when exception occurs.
The start/initialize functions of wasi module are to do some initialization work
during instantiation, which should be only called one time in the instantiation
of main instance. For example, they may initialize the data in linear memory,
if the data is changed later by the main instance, and re-initialized again by
the child instance, unexpected behaviors may occur.
And clear a shadow warning in classic interpreter.
Multiple threads generated from the same module should use the same
lock to protect the atomic operations.
Before this PR, each thread used a different lock to protect atomic
operations (e.g. atomic add), making the lock ineffective.
Fix#1958.
Enable setting running mode when executing a wasm bytecode file
- Four running modes are supported: interpreter, fast-jit, llvm-jit and multi-tier-jit
- Add APIs to set/get the default running mode of the runtime
- Add APIs to set/get the running mode of a wasm module instance
- Add running mode options for iwasm command line tool
And add size/opt level options for LLVM JIT
Implement 2-level Multi-tier JIT engine: tier-up from Fast JIT to LLVM JIT to
get quick cold startup by Fast JIT and better performance by gradually
switching to LLVM JIT when the LLVM JIT functions are compiled by the
backend threads.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1302
Allow to add watchpoints to variables for source debugging. For instance:
`breakpoint set variable var`
will pause WAMR execution when the address at var is written to.
Can also set read/write watchpoints by passing r/w flags. This will pause
execution when the address at var is read:
`watchpoint set variable -w read var`
Add two linked lists for read/write watchpoints. When the debug message
handler receives a watchpoint request, it adds/removes to one/both of these
lists. In the interpreter, when an address is read or stored to, check whether
the address is in these lists. If so, throw a sigtrap and suspend the process.
When a wasm module is duplicated instantiated with wasm_instance_new,
the function import info of the previous instantiation may be overwritten by
the later instantiation, which may cause unexpected behavior.
Store the function import info into the module instance to fix the issue.
