Avoid repeatedly initializing the shared memory data when creating the child
thread in lib-pthread or lib-wasi-threads.
Add shared memory lock when accessing some fields of the memory instance
if the memory instance is shared.
Init shared memory's memory_data_size/memory_data_end fields according to
the current page count but not max page count.
Add wasm_runtime_set_mem_bound_check_bytes, and refine the error message
when shared memory flag is found but the feature isn't enabled.
When labels-as-values is enabled in a target which doesn't support
unaligned address access, 16-bit offset is used to store the relative
offset between two opcode labels. But it is a little small and the loader
may report "pre-compiled label offset out of range" error.
Emitting 32-bit data instead to resolve the issue: emit label address in
32-bit target and emit 32-bit relative offset in 64-bit target.
See also:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/2635
Support muti-module for AOT mode, currently only implement the
multi-module's function import feature for AOT, the memory/table/
global import are not implemented yet.
And update wamr-test-suites scripts, multi-module sample and some
CIs accordingly.
`wasm_loader_push_pop_frame_offset` may pop n operands by using
`loader_ctx->stack_cell_num` to check whether the operand can be
popped or not. While `loader_ctx->stack_cell_num` is updated in the
later `wasm_loader_push_pop_frame_ref`, the check may fail if the stack
is in polymorphic state and lead to `ctx->frame_offset` underflow.
Fix issue #2577 and #2586.
Segue is an optimization technology which uses x86 segment register to store
the WebAssembly linear memory base address, so as to remove most of the cost
of SFI (Software-based Fault Isolation) base addition and free up a general
purpose register, by this way it may:
- Improve the performance of JIT/AOT
- Reduce the footprint of JIT/AOT, the JIT/AOT code generated is smaller
- Reduce the compilation time of JIT/AOT
This PR uses the x86-64 GS segment register to apply the optimization, currently
it supports linux and linux-sgx platforms on x86-64 target. By default it is disabled,
developer can use the option below to enable it for wamrc and iwasm(with LLVM
JIT enabled):
```bash
wamrc --enable-segue=[<flags>] -o output_file wasm_file
iwasm --enable-segue=[<flags>] wasm_file [args...]
```
`flags` can be:
i32.load, i64.load, f32.load, f64.load, v128.load,
i32.store, i64.store, f32.store, f64.store, v128.store
Use comma to separate them, e.g. `--enable-segue=i32.load,i64.store`,
and `--enable-segue` means all flags are added.
Acknowledgement:
Many thanks to Intel Labs, UC San Diego and UT Austin teams for introducing this
technology and the great support and guidance!
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Co-authored-by: Vahldiek-oberwagner, Anjo Lucas <anjo.lucas.vahldiek-oberwagner@intel.com>
When ref.func opcode refers to a function whose function index no smaller than
current function, the destination func should be forward-declared: it is declared
in the table element segments, or is declared in the export list.
Multiple threads generated from the same module should use the same
lock to protect the atomic operations.
Before this PR, each thread used a different lock to protect atomic
operations (e.g. atomic add), making the lock ineffective.
Fix#1958.
Add APIs to help prepare the imports for the wasm-c-api `wasm_instance_new`:
- wasm_importtype_is_linked
- wasm_runtime_is_import_func_linked
- wasm_runtime_is_import_global_linked
- wasm_extern_new_empty
For wasm-c-api, developer may use `wasm_module_imports` to get the import
types info, check whether an import func/global is linked with the above API,
and ignore the linking of an import func/global with `wasm_extern_new_empty`.
Sample `wasm-c-api-import` is added and document is updated.
Enable setting running mode when executing a wasm bytecode file
- Four running modes are supported: interpreter, fast-jit, llvm-jit and multi-tier-jit
- Add APIs to set/get the default running mode of the runtime
- Add APIs to set/get the running mode of a wasm module instance
- Add running mode options for iwasm command line tool
And add size/opt level options for LLVM JIT
Change an error to warning when checking wasi abi compatibility in loader, for rust case below:
#[no_mangle]
pub extern "C" fn main() {
println!("foo");
}
compile it with `cargo build --target wasm32-wasi`, a wasm file is generated with wasi apis imported
and a "void main(void)" function exported.
Other runtime e.g. wasmtime allows to load it and execute the main function with `--invoke` option.
Should use import_function_count but not import_count to calculate
the func_index in handle_name_section when custom name section
feature is enabled.
And clear the compile warnings of mini loader.
Support modes:
- run a commander module only
- run a reactor module only
- run a commander module and a/multiple reactor modules together
commander propagates WASIArguments to reactors
Implement 2-level Multi-tier JIT engine: tier-up from Fast JIT to LLVM JIT to
get quick cold startup by Fast JIT and better performance by gradually
switching to LLVM JIT when the LLVM JIT functions are compiled by the
backend threads.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1302
Limit max_stack_cell_num/max_csp_num to be no larger than UINT16_MAX,
and don't check all_cell_num in interpreter again.
And refine some codes in interpreter.
Refine the generated LLVM IRs at the beginning of each LLVM AOT/JIT function
to fasten the LLVM IR optimization:
- Only create argv_buf if there are func calls in this function
- Only create native stack bound if stack bound check is enabled
- Only create aux stack info if there is opcode set_global_aux_stack
- Only create native symbol if indirect_mode is enabled
- Only create memory info if there are memory operations
- Only create func_type_indexes if there is opcode call_indirect
Refactor LLVM JIT for some purposes:
- To simplify the source code of JIT compilation
- To simplify the JIT modes
- To align with LLVM latest changes
- To prepare for the Multi-tier JIT compilation, refer to #1302
The changes mainly include:
- Remove the MCJIT mode, replace it with ORC JIT eager mode
- Remove the LLVM legacy pass manager (only keep the LLVM new pass manager)
- Change the lazy mode's LLVM module/function binding:
change each function in an individual LLVM module into all functions in a single LLVM module
- Upgraded ORC JIT to ORCv2 JIT to enable lazy compilation
Refer to #1468
Refactor the layout of interpreter and AOT module instance:
- Unify the interp/AOT module instance, use the same WASMModuleInstance/
WASMMemoryInstance/WASMTableInstance data structures for both interpreter
and AOT
- Make the offset of most fields the same in module instance for both interpreter
and AOT, append memory instance structure, global data and table instances to
the end of module instance for interpreter mode (like AOT mode)
- For extra fields in WASM module instance, use WASMModuleInstanceExtra to
create a field `e` for interpreter
- Change the LLVM JIT module instance creating process, LLVM JIT uses the WASM
module and module instance same as interpreter/Fast-JIT mode. So that Fast JIT
and LLVM JIT can access the same data structures, and make it possible to
implement the Multi-tier JIT (tier-up from Fast JIT to LLVM JIT) in the future
- Unify some APIs: merge some APIs for module instance and memory instance's
related operations (only implement one copy)
Note that the AOT ABI is same, the AOT file format, AOT relocation types, how AOT
code accesses the AOT module instance and so on are kept unchanged.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1384
And enable classic interpreter instead fast interpreter when llvm jit is enabled,
so as to fix the issue that llvm jit cannot handle opcode drop_64/select_64.
Remove handling opcode DROP_64/SELECT_64 in loader stage
prepare_bytecode, as they are the modified opcodes of DROP/SELECT
for optimization purpose, but not the opcodes defined by spec.
Normalize wasm types, for the two wasm types, if their parameter types
and result types are the same, we only save one copy, so as to reduce
the footprint and simplify the type comparison in opcode CALL_INDIRECT.
And fix issue in interpreter globals_instantiate, and remove used codes.
Reserve one pointer size for fast-interp code_compiled_size: if the last opcode of
current function is to be dropped (e.g. OP_DROP), the peak memory usage will
be larger than the final code_compiled_size, we record the peak size to ensure
there won't be invalid memory access during the second traversing.
Should not clear last label's polymorphic state after current label is popped
Fix invalid func_idx check in opcode REF_FUNC
Add check when there are extra unneeded bytecodes for a wasm function
Import WAMR Fast JIT which is a lightweight JIT with quick startup, small footprint,
relatively good performance (~40% to ~50% of LLVM JIT) and good portability.
Platforms supported: Linux, MacOS and Linux SGX.
Arch supported: x86-64.
Refine opcode br_table for classic interpreter as there may be a lot of
leb128 decoding when the br count is big:
1. Use the bytecode itself to store the decoded leb br depths if each
decoded depth can be stored with one byte
2. Create br_table cache to store the decode leb br depths if the decoded
depth cannot be stored with one byte
After the optimization, the class interpreter can access the br depths array
with index, no need to decode the leb128 again.
And fix function record_fast_op() return value unchecked issue in source
debugging feature.
Fix the potential integer overflow of const index in const space of fast interpreter,
emit i32/i64.const opcode when the const index is larger than INT32_MAX.
And add check for the function local cell num.
Fix handle OP_TABLE_COPY issue
Fix loader handle OP_BLOCK/IF/LOOP issue if type_index is larger than 256
Fix loader handle OP_GET_GLOBAL, allow to change to GET_GLOBAL_64 for
aot compiler similiar to handling OP_SET_GLOBAL
Refine loader handle OP_GET/SET/TEE_LOCAL, disable changing opcode when
source debugging is enabled, so as no need to record the change of opcode
Refine wasm_interp_interp_frame_size to reduce the wasm operand stack usage
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
