Set the vendor-sys of bare-metal targets to "-unknown-none-",
and currently only add "thumbxxx" to the bare-metal target list.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
The commit fa5e9d72b0 ("Abstract POSIX filesystem functions") introduces
the build warning:
./core/iwasm/libraries/libc-wasi/sandboxed-system-primitives/src/posix.c: In function ‘fd_object_release’:
./core/iwasm/libraries/libc-wasi/sandboxed-system-primitives/src/posix.c:545:20: warning: this statement may fall through [-Wimplicit-fallthrough=]
545 | if (os_is_dir_stream_valid(&fo->directory.handle)) {
| ^
./core/iwasm/libraries/libc-wasi/sandboxed-system-primitives/src/posix.c:549:13: note: here
549 | default:
| ^~~~~~~
Refer to the commit fb4afc7ca4 ("Apply clang-format for core/iwasm compilation and libraries"),
add one line "// Fallthrough." to make compiler happy.
Signed-off-by: Haiyue Wang <haiyue.wang@intel.com>
`platform_common.h` already has a declaration for BH_VPRINTF so we can
get rid of the one in `platform_internal.h`. Also add some explicit
casts to avoid MSVC compiler warnings.
UWP apps do not have a console attached so any output to stdout/stderr
is lost. Therefore, provide a default BH_VPRINTF in that case for debug
builds which redirects output to the debugger.
To allow anything to depend on WASI types, including platform-specific
data structures, move the WASI libc filesystem/clock interface into
`platform_api_extension.h`, which leaves just WASI types in
`platform_wasi.h`. And `platform_wasi.h` has been renamed to
`platform_wasi_types.h` to reflect that it only defines types now and no
function declarations. Finally, these changes allow us to remove the
`windows_fdflags` type which was essentially a duplicate of
`__wasi_fdflags_t`.
Most of the WASI filesystem tests require at least creating/deleting a
file to test filesystem functionality so some additional filesystem APIs
have been implemented on Windows so we can test what has been
implemented so far. For those WASI functions which haven't been
implemented, we skip the tests. These will be implemented in a future PR
after which we can remove the relevant filters.
Additionally, in order to run the WASI socket and thread tests, we need
to install the wasi-sdk in CI and build the test source code prior to
running the tests.
`jit_reg_is_const_val` only checks whether the register is a const register and
the const value is stored in the register.
Should use `jit_reg_is_const` instead in the front end.
Reported in #2710.
- Fix potential invalid push param phis and add incoming phis to a un-existed basic block
- Fix potential invalid shift count int rotl/rotr opcodes
- Resize memory_data_size to UINT32_MAX if it is 4G when hw bound check is enabled
- Fix negative linear memory offset is used for 64-bit target it is const and larger than INT32_MAX
To run it locally:
```bash
export TSAN_OPTIONS=suppressions=<path_to_tsan_suppressions.txt>
./test_wamr.sh <your flags> -T tsan
```
An example for wasi-threads would look like:
```bash
export TSAN_OPTIONS=suppressions=<path_to_tsan_suppressions.txt>
./test_wamr.sh -w -s wasi_certification -t fast-interp -T tsan
```
Split memory instance's field `uint32 ref_count` into `bool is_shared_memory`
and `uint16 ref_count`, and lock the memory only when `is_shared_memory`
flag is true, no need to acquire a lock for non-shared memory when shared
memory feature is enabled.
Avoid repeatedly initializing the shared memory data when creating the child
thread in lib-pthread or lib-wasi-threads.
Add shared memory lock when accessing some fields of the memory instance
if the memory instance is shared.
Init shared memory's memory_data_size/memory_data_end fields according to
the current page count but not max page count.
Add wasm_runtime_set_mem_bound_check_bytes, and refine the error message
when shared memory flag is found but the feature isn't enabled.
Fixes the Cosmopolitan Libc platform attempting to use `/dev/urandom`
on operating systems that do not have it.
Signed-off-by: G4Vi <gavin@dylibso.com>
This patch enables mapping host directories to guest directories by parsing
the `map_dir_list` argument in API `wasm_runtime_init_wasi` for libc-wasi. It
follows the format `<guest-path>::<host-path>`.
It also adds argument `--map-dir=<guest::host>` argument for `iwasm`
common line tool, and allows to add multiple mappings:
```bash
iwasm --map-dir=<guest-path1::host-path1> --map-dir=<guest-path2::host-path2> ...
```
Implement the necessary os_ filesystem functions to enable successful
WASI initialization on Windows. Some small changes were also required to
the sockets implementation to use the new windows_handle type. The
remaining functions will be implemented in a future PR.
When labels-as-values is enabled in a target which doesn't support
unaligned address access, 16-bit offset is used to store the relative
offset between two opcode labels. But it is a little small and the loader
may report "pre-compiled label offset out of range" error.
Emitting 32-bit data instead to resolve the issue: emit label address in
32-bit target and emit 32-bit relative offset in 64-bit target.
See also:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/2635
To allow non-POSIX platforms such as Windows to support WASI libc
filesystem functionality, create a set of wrapper functions which provide a
platform-agnostic interface to interact with the host filesystem. For now,
the Windows implementation is stubbed but this will be implemented
properly in a future PR. There are no functional changes in this change,
just a reorganization of code to move any direct POSIX references out of
posix.c in the libc implementation into posix_file.c under the shared
POSIX sources.
See https://github.com/bytecodealliance/wasm-micro-runtime/issues/2495 for a
more detailed overview of the plan to port the WASI libc filesystem to Windows.
MASM (Microsoft Macro Assembler) needs to be enabled to successfully
compile .asm files on Windows. Without enabling this language
automatically in runtime_lib.cmake, Windows cmake projects using WAMR
get hard-to-diagnose linker errors about missing symbols as the assembly
file is not compiled at all.
When doing more investigations related to this PR:
https://github.com/bytecodealliance/wasm-micro-runtime/pull/2619
We found that in some scenarios the constant might not be directly
available to the LLVM IR builder, e.g.:
```
(func $const_ret (result i32)
i32.const -5
)
(func $foo
(i32.shr_u (i32.const -1) (call $const_ret))
(i32.const 31)
)
```
In that case, the right parameter to `i32.shr_u` is not constant, therefore
the `SHIFT_COUNT_MASK` isn't applied. However, when the optimization
is enabled (`--opt-level` is 2 or 3), the optimization passes resolve the
call into constant, and that constant is poisoned, causing the compiler to
resolve the whole function to an exception.
According to the description of `buildPerModuleDefaultPipeline()` and
`buildLTOPreLinkDefaultPipeline()`, it is not allowed to call them with `O0` level.
Use `buildO0DefaultPipeline` instead when the opt-level is 0.
The LLVM zext IR may be inserted after the terminator of a basic block
when popping the arguments of a wasm block. Change to insert the
zext IR before the terminator of the basic block to resolve the issue.
Reported in #2620.
This PR adds the Cosmopolitan Libc platform enabling compatibility with multiple
x86_64 operating systems with the same binary. The platform is similar to the
Linux platform, but for now only x86_64 with interpreter modes are supported.
The only major change to the core is `posix.c/convert_errno()` was rewritten to use
a switch statement. With Cosmopolitan errno values depend on the currently
running operating system, and so they are non-constant and cannot be used in array
designators. However, the `cosmocc` compiler allows non-constant case labels in
switch statements, enabling the new version.
And updated wamr-test-suites script to add `-j <platform>` option. The spec tests
can be ran via `CC=cosmocc ./test_wamr.sh -j cosmopolitan -t classic-interp`
or `CC=cosmocc ./test_wamr.sh -j cosmopolitan -t fast-interp`.
To make it clearer to users when synchronization behaviour is not
supported, return ENOTSUP when O_RSYNC, O_DSYNC or O_SYNC are
respectively not defined. Linux also doesn't support O_RSYNC despite the
O_RSYNC flag being defined.
Fixed a bug in the processing of the br_table_cache opcode that caused out-of-range
references when the label index was greater than the length of the label.
