Enable setting running mode when executing a wasm bytecode file
- Four running modes are supported: interpreter, fast-jit, llvm-jit and multi-tier-jit
- Add APIs to set/get the default running mode of the runtime
- Add APIs to set/get the running mode of a wasm module instance
- Add running mode options for iwasm command line tool
And add size/opt level options for LLVM JIT
The definitions `enum WASMExceptionID` in the compilation of wamrc and the compilation
of Fast JIT are different, since the latter enables the Fast JIT macro while the former doesn't.
This causes that the exception ID in AOT file generated by wamrc may be different from
iwasm binary compiled with Fast JIT enabled, and may result in unexpected behavior.
Remove the macro control to resolve it.
This syscall doesn't need allocating stack or TLS and it's expected from the application
to do that instead. E.g. WASI-libc already does this for `pthread_create`.
Also fix some of the examples to allocate memory for stack and not use stack before
the stack pointer is set to a correct value.
Support modes:
- run a commander module only
- run a reactor module only
- run a commander module and a/multiple reactor modules together
commander propagates WASIArguments to reactors
Implement 2-level Multi-tier JIT engine: tier-up from Fast JIT to LLVM JIT to
get quick cold startup by Fast JIT and better performance by gradually
switching to LLVM JIT when the LLVM JIT functions are compiled by the
backend threads.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1302
When a wasm module is duplicated instantiated with wasm_instance_new,
the function import info of the previous instantiation may be overwritten by
the later instantiation, which may cause unexpected behavior.
Store the function import info into the module instance to fix the issue.
Implement 2-level Multi-tier JIT engine: tier-up from Fast JIT to LLVM JIT to
get quick cold startup by Fast JIT and better performance by gradually
switching to LLVM JIT when the LLVM JIT functions are compiled by the
backend threads.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1302
For now this implementation uses thread manager.
Not sure whether thread manager is needed in that case. In the future there'll be likely another syscall added (for pthread_exit) and for that we might need some kind of thread management - with that in mind, we keep thread manager for now and will refactor this later if needed.
When a wasm module is duplicated instantiated with wasm_instance_new,
the function import info of the previous instantiation may be overwritten by
the later instantiation, which may cause unexpected behavior.
Store the function import info into the module instance to fix the issue.
Use sha256 to hash binary file content. If the incoming wasm binary is
cached before, wasm_module_new() simply returns the existed one.
Use -DWAMR_BUILD_WASM_CACHE=0/1 to control the feature.
OpenSSL 1.1.1 is required if the feature is enabled.
Record the store number of current thread with struct thread_local_stores
or tls thread_local_stores_num to fix the issue:
- Only call wasm_runtime_init_thread_env() in the first wasm_store_new of
current thread
- Only call wasm_runtime_destroy_thread_env() in the last wasm_store_delete
of current thread
And remove the unused store list in the engine.
Refine AOT exception check in the caller when returning from callee function,
remove the exception check instructions when hw bound check is enabled to
improve the performance: create guard page to trigger signal handler when
exception occurs.
Add an option to pass user data to the allocator functions. It is common to
do this so that the host embedder can pass a struct as user data and access
that struct from the allocator, which gives the host embedder the ability to
do things such as track allocation statistics within the allocator.
Compile with `cmake -DWASM_MEM_ALLOC_WITH_USER_DATA=1` to enable
the option, and the allocator functions provided by the host embedder should
be like below (an extra argument `data` is added):
void *malloc(void *data, uint32 size) { .. }
void *realloc(void *data, uint32 size) { .. }
void free(void *data, void *ptr) { .. }
Signed-off-by: Andrew Chambers <ncham@amazon.com>
Create trap for error message when wasm_instance_new fails:
- Similar to [this PR](https://github.com/bytecodealliance/wasm-micro-runtime/pull/1526),
but create a wasm_trap_t to output the error msg instead of adding error_buf to the API.
- Trap will need to be deleted by the caller but is not a breaking change as it is only
created if trap is not NULL.
- Add error messages for all failure cases here, try to make them accurate but welcome
feedback for improvements.
Signed-off-by: Andrew Chambers <ncham@amazon.com>
Current SGX lib-rats wasm module hash is stored in a global buffer,
which may be overwritten if there are multiple wasm module loadings.
We move the module hash into the enclave module to resolve the issue.
And rename the SGX_IPFS macro/variable in Makefile and Enclave.edl to
make the code more consistent.
And refine the sgx-ra sample document.
Update build wasm app document, add how to set buildflags for Rust
project to reduce the footprint.
Clear Windows warnings and a shadow warning in aot_emit_numberic.c
Add a new options to control the native stack hw bound check feature:
- Besides the original option `cmake -DWAMR_DISABLE_HW_BOUND_CHECK=1/0`,
add a new option `cmake -DWAMR_DISABLE_STACK_HW_BOUND_CHECK=1/0`
- When the linear memory hw bound check is disabled, the stack hw bound check
will be disabled automatically, no matter what the input option is
- When the linear memory hw bound check is enabled, the stack hw bound check
is enabled/disabled according to the value of input option
- Besides the original option `--bounds-checks=1/0`, add a new option
`--stack-bounds-checks=1/0` for wamrc
Refer to: https://github.com/bytecodealliance/wasm-micro-runtime/issues/1677
Currently we initialize and destroy LLVM environment in aot_create_comp_context
and aot_destroy_comp_context, which are called in wasm_module_load/unload,
and the latter may be invoked multiple times, which leads to duplicated LLVM
initialization/destroy and may result in unexpected behaviors.
Move the LLVM init/destroy into runtime init/destroy to resolve the issue.
Allow to have multiple stores in an engine and multiple instances
in a store. Letting a wasm_function_t pass its wasm_store_t to make
it more efficient.
Add macro WASM_ENABLE_WORD_ALING_READ to enable reading
1/2/4 and n bytes data from vram buffer, which requires 4-byte addr
alignment reading.
Eliminate XIP AOT relocations related to the below ones:
i32_div_u, f32_min, f32_max, f32_ceil, f32_floor, f32_trunc, f32_rint
Change wasm-c-api default log level to output less logs by default:
- For debug mode, change log level from 5 to 4
- For release mode, change log level from 3 to 2
The host embedder may new/delete wasm-c-api engine simultaneously
in multiple threads, which requires lock for the operations. Since there
isn't one time called global init/destroy APIs provided by wasm-c-api,
we define a global lock and initialize it with thread mutex initializer if
the platform supports that, and use it to lock the operations of engine.
If the platform doesn't support thread mutex initializer, we require
developer to create the lock by himself to ensure the thread-safe of the
engine operations.
Allow to unregister (or unload) the previously registered native libs,
so that no need to restart the whole engine by using
`wasm_runtime_destroy/wasm_runtime_init`.
Refactor the layout of interpreter and AOT module instance:
- Unify the interp/AOT module instance, use the same WASMModuleInstance/
WASMMemoryInstance/WASMTableInstance data structures for both interpreter
and AOT
- Make the offset of most fields the same in module instance for both interpreter
and AOT, append memory instance structure, global data and table instances to
the end of module instance for interpreter mode (like AOT mode)
- For extra fields in WASM module instance, use WASMModuleInstanceExtra to
create a field `e` for interpreter
- Change the LLVM JIT module instance creating process, LLVM JIT uses the WASM
module and module instance same as interpreter/Fast-JIT mode. So that Fast JIT
and LLVM JIT can access the same data structures, and make it possible to
implement the Multi-tier JIT (tier-up from Fast JIT to LLVM JIT) in the future
- Unify some APIs: merge some APIs for module instance and memory instance's
related operations (only implement one copy)
Note that the AOT ABI is same, the AOT file format, AOT relocation types, how AOT
code accesses the AOT module instance and so on are kept unchanged.
Refer to:
https://github.com/bytecodealliance/wasm-micro-runtime/issues/1384
Initial integration of WASI-NN based on #1225:
- Implement the library core/iwasm/libraries/wasi-nn
- Support TensorFlow, CPU, F32 at the first stage
- Add cmake variable `-DWAMR_BUILD_WASI_NN`
- Add test case based on Docker image and update document
Refer to #1573
Implement more socket APIs, refer to #1336 and below PRs:
- Implement wasi_addr_resolve function (#1319)
- Fix socket-api byte order issue when host/network order are the same (#1327)
- Enhance sock_addr_local syscall (#1320)
- Implement sock_addr_remote syscall (#1360)
- Add support for IPv6 in WAMR (#1411)
- Implement ns lookup allowlist (#1420)
- Implement sock_send_to and sock_recv_from system calls (#1457)
- Added http downloader and multicast socket options (#1467)
- Fix `bind()` calls to receive the correct size of `sockaddr` structure (#1490)
- Assert on correct parameters (#1505)
- Copy only received bytes from socket recv buffer into the app buffer (#1497)
Co-authored-by: Marcin Kolny <mkolny@amazon.com>
Co-authored-by: Marcin Kolny <marcin.kolny@gmail.com>
Co-authored-by: Callum Macmillan <callumimacmillan@gmail.com>
Fix multi-module issue:
don't call the sub module's function with "$sub_module_name$func_name"
Fix the aot_call_function free argv1 issue
Modify some API comments in wasm_export.h
Fix the wamrc help info
Destroy Fast-JIT compiler after destroying the modules loaded by
multi-module feature, since the Fast JIT's code cache allocator may
be used by these modules. If the Fast JIT's code cache allocator was
destroyed, then runtime will fail to destroy these modules.
And fix the issue of destroying import module's memory instance.
Use the semantic versioning (https://semver.org) to replace the current date
versioning system, which is more general and is requested by some developers,
e.g. issue #1357.
There are three parts in the new version string:
- major. Any incompatible modification on ABIs and APIs will lead to an increment
in the value of major, which mainly includes: AOT calling conventions, AOT file
format, wasm_export.h, wasm_c_api.h, and so on.
- minor. It represents new features, including MVP/POST-MVP features, libraries,
WAMR private ones, and so one.
- patch. It represents patches.
The new version will start from 1.0.0. Update the help info and version showing for
iwasm and wamrc.
Remove some unused fields in module instance and the related codes,
which are introduced by emsdk some special mode (-DSIDE_MODULE=1),
and are not required now.
Add a new option WAMR_BUILD_STACK_GUARD_SIZE to set the custom
stack guard size. For most RTOS systems, we use the native stack base
address as the check boundary which may be not safe as POSIX based
systems (like Linux).
ASSERT_NOT_IMPLEMENTED is bh_assert, which might be no-op.
in that case, it's better to fall back to the "default" case,
which reports an error properly.
Import WAMR Fast JIT which is a lightweight JIT with quick startup, small footprint,
relatively good performance (~40% to ~50% of LLVM JIT) and good portability.
Platforms supported: Linux, MacOS and Linux SGX.
Arch supported: x86-64.
Fix build script to enable hw bound check for interpreter when
AOT is disabled, so as to enable spec cases test for interp with
hw bound check. And fix the issues found.
Implement boundary check with hardware trap for interpreter on
64-bit platforms:
- To improve the performance of interpreter and Fast JIT
- To prepare for multi-tier compilation for the feature
Linux/MacOS/Windows 64-bit are enabled.
When using clang compiler, the f32/f64 return value might be
invalid when calling invokeNative asm code. Declare the return
type of invokeNative as void, and set volatile for the converted
function pointers to resolve the issue.
Enable dump call stack to a buffer, use API
`wasm_runtime_get_call_stack_buf_size` to get the required buffer size
and use API
`wasm_runtime_dump_call_stack_to_buf` to dump call stack to a buffer
Implement Go binding APIs of runtime, module and instance
Add sample, build scripts and update the document
Co-authored-by: venus-taibai <97893654+venus-taibai@users.noreply.github.com>
Automatically dump memory/performance profiling data in
wasm_application_execute_main and wasm_application_execute_func when
the related feature is enabled.
And remove unused aot_compile_wasm_file func declaration in aot_compiler.h.
wasm_c_api.c: add more checks, fix LOG_WARNING invalid specifier
aot_emit_aot_file: fix strncpy max size length to copy
posix.c: fix potential socket not close issue
wasm-c-api samples: add return value checks for fseek/ftell
cJSON.c: remove dead code
module_wasm_app.c: add return value check for wasm_runtime_call_wasm
aot_runtime.c: add return value check for aot_get_default_memory
aot_runtime.c: add return value check before calling wasm app malloc/free func
wasm_runtime_common.c: fix dead code warning in wasm_runtime_load_from_sections
aot_emit_memory.c: fix potential integer overflow issue
wasm_runtime.c: remove dead code in memory_instantiate, add assertion for globals
samples simple/gui/littlevgl: fix fields of struct sigaction initialization issue
host-tool: add return value check for sendto
Add assertion for BH_MALLOC/BH_FREE in wasm_runtime_common.c,
when building runtime, the BH_MALLOC/BH_FREE macros should be
defined as wasm_runtime_malloc/wasm_runtime_free.
Fix wasm_application_execute_main/wasm_application_execute_func not waiting for
other threads to terminate in multi-thread mode, which causes that the exception
thrown by other threads may haven't been spreaded to current main thread, and
cannot be detected by the caller, as reported in #1131.
Remove the `const` flag for the first argument `buf` of wasm_runtime_load as
it might be modified by runtime for footprint and performance purpose, and
update the related functions and document.
This patch allows safer (note: safer, not safe) embedding in a plugin
environment where multiple instances of the engine could be needed.
Original code initializes and tears down the full runtime during
wasm_engine_new() and wasm_engine_delete() respectively. After this
update the C API implementation keeps track of engine instances count
and inits/deinits the runtime only when needed.
This allows for example to call wasm_engine_new() twice and then call
wasm_engine_delete() once without rendering the first engine instance
invalid.
Refer to [Networking API design](https://github.com/WebAssembly/WASI/issues/370)
and [feat(socket): berkeley socket API v2](https://github.com/WebAssembly/WASI/pull/459):
- Support the socket API of synchronous mode, including `socket/bind/listen/accept/send/recv/close/shutdown`,
the asynchronous mode isn't supported yet.
- Support adding `--addr-pool=<pool1,pool2,..>` argument for command line to identify the valid ip address range
- Add socket-api sample and update the document
Fix several issues in wasm-c-api wasm_module_imports function:
1. Two of the if branches never set the module_name and name fields which are later passed as arguments to wasm_importtype_new, and eventually might cause double-free and/or use-after-free
2. Should zero module_name/name/extern_type at the start of loop iteration, and destroy their resources when failed at the end of loop iteration
2. No need to check `if (!extern_type) { continue; }`, as extern_type is converted from type and type is already checked
3. No need to wasm_importtype_vec_delete(out) when failed, as it is passed from outside and should be destroyed by outside
Use LLVM new pass manager for wamrc to replace the legacy pass manger,
so as to gain better performance and reduce the compilation time.
Reference links:
- https://llvm.org/docs/NewPassManager.html
- https://blog.llvm.org/posts/2021-03-26-the-new-pass-manager
And add an option to use the legacy pm mode when building wamrc:
cmake .. -DWAMR_BUILD_LLVM_LEGACY_PM=1
For JIT mode, keep it unchanged as it only runs several function passes and
using new pass manager will increase the compilation time.
And refactor the codes of applying LLVM passes.
Refactor LLVM Orc JIT to actually enable the lazy compilation and speedup
the launching process:
https://llvm.org/docs/ORCv2.html#laziness
Main modifications:
- Create LLVM module for each wasm function, wrap it with thread safe module
so that the modules can be compiled parallelly
- Lookup function from aot module instance's func_ptrs but not directly call the
function to decouple the module relationship
- Compile the function when it is first called and hasn't been compiled
- Create threads to pre-compile the WASM functions parallelly when loading
- Set Lazy JIT as default, update document and build/test scripts
Currently when calling wasm_runtime_call_wasm() to invoke wasm function
with externref type argument from runtime embedder, developer needs to
use wasm_externref_obj2ref() to convert externref obj into an internal ref
index firstly, which is not convenient to developer.
To align with GC feature in which all the references passed to
wasm_runtime_call_wasm() can be object pointers directly, we change the
interface of wasm_runtime_call_wasm() to allow to pass object pointer
directly for the externref argument, and refactor the related codes, update
the related samples and the document.
Refine is_xip_file check, when e_type isn't E_TYPE_XIP, just return false
and no need to go through all the other sections of the AOT file.
Refine pointer range check, convert pointer to uintptr_t type before
comparison to yield possible sanitizer pointer overflow error.
Fix the issue that joining a detached thread might result in joining hang,
resolve the issue by adding wait_count for a thread's exec_env to indicate
whether a thread needs to detach itself or not when it exits.
And add checks for the input exec_env for cluster's join/detach/cancel thread.
Refer to https://github.com/WebAssembly/WASI/blob/main/design/application-abi.md
to check the WASI ABI compatibility:
- Command (main module) may export _start function with signature "()"
- Reactor (sub module) may export _initialize function with signature "()"
- _start and _initialize can not be exported at the same time
- Reactor cannot export _start function
- Command and Reactor must export memory
And
- Rename module->is_wasi_module to module->import_wasi_api
- Refactor wasm_loader_find_export()
- Remove MULTI_MODULE related codes from mini_loader
- Update multi-module samples
- Fix a "use-after-free" issue. Since we reuse the memory instance of sub module,
just to protect it from freeing an imported memory instance
Use `PRIxxx` related macros to format the output strings so as to clear
compile warnings, e.g. PRIu32, PRId32, PRIX32, PRIX64 and so on.
And add the related macro definitions in platform_common.h if they
are not defined, as some compilers might not support them.
Refine some codes in wasm loader
Add -Wshadow to gcc compile flags and fix some variable shadowed issues
Fix function parameter/return types not checked issue
Fix fast-interp loader reserve_block_ret() not handle V128 return type issue
Fix mini loader load_table_segment_section() failed issue
Add detailed comments for argc argument in wasm_runtime_call_wasm()
Auto detect whether file is XIP file before loading module in posix like and
linux-sgx platforms, and if yes, mmap executable memory automatically to
run the XIP file.
Add document about XIP feature.
Enable test spec cases with XIP feature.
- move the wait_cond from exec_env to debug_instance, so the debug thread can be waken up by any threads
- process more general query message from debugger
- refine debug instance create/destroy mechanism
- avoid creating debug instance during module instantiating
- avoid blocking execution thread during creating debug instance
- update related documents
Don't throw exception when module_malloc memory failed:
- Exception will terminate the wasm app, it's not necessary since app can
check the result of dynamic allocation and do some cleanup or fallback
operation on failure instead of 'crash' directly.
- In acquire_wait_info, call hasn_map_find only when the address isn't NULL,
or there are many senseless error logs
Fix some potential pointer overflows in aot applying relocations and
several other places.
And add sanitizer compiler flags to wamrc CMakeLists.txt to detect
such issues.
Allow empty import array (but not NULL) for wasm-c-api wasm_instance_new,
which makes the code more robust, especially in use cases where imports
might be constructed dynamically.
And add a test case in samples/wasm-c-api/src/empty_imports.c to test it.
Apply clang-format for core/iwasm/include, core/iwasm/common and
core/iwasm/aot files.
Update spec cases test script:
- Checkout latest commit of https://github.com/WebAssembly/spec
- Checkout main branch but not master of https://github.com/WebAssembly/threads
- Update wabt to latest version
And update source debugging document.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Implement source debugging feature for classic interpreter and AOT:
- use `cmake -DWAMR_BUILD_DEBUG_INTERP=1` to enable interpreter debugging
- use `cmake -DWAMR_BUILD_DEBUG_AOT=1` to enable AOT debugging
See doc/source_debugging.md for more details.
Fix document issues: add ARC to supported targets, fix how to build wamrc for MacOS.
Fix spec case test script issue: the latest wabt has enabled simd by default, no need to
add "--enable-simd" option for test script.
Fix simd LLVM IR compilation issue: using index calculated by opcode to access array
element should not be out of array boundary, add bh_assert() for it.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
The WASM C API now requires the use of vector types in certain apis.
Switching WAMR to use the new call signatures improves "drop in"
compilation compatibility between WAMR and other implementations
from a C-api embedding program's perspective.
* wasm_func_callback_t type has been updated to use wasm_val_vec_t
* wasm_func_callback_with_env_t type has been updated to use wasm_val_vec_t
* wasm_func_call() has been updated to use wasm_val_vec_t
* wasm_instance_new() has been updated to use wasm_extern_vec_t*
* wasm_instance_new_with_args() has been updated to use wasm_extern_vec_t*
* wasm_runtime_invoke_c_api_native() has been updated to support vector types
in native callbacks without modifying the contract with the interpreter code.
* All users of the modified functions (including samples/wasm-c-api/src/*.c)
have been appropriately updated.
Some of the function arguments were named as "export" in core/iwasm/common/wasm_runtime_common.h, which result in conflicts with the C++11 keyword. Change them to other to fix the compilation error.
Implement XIP (Execution In Place) feature for AOT mode to enable running the AOT code inside AOT file directly, without memory mapping the executable memory for AOT code and applying relocations for text section. Developer can use wamrc with "--enable-indirect-mode --disable-llvm-intrinsics" flags to generate the AOT file and run iwasm with "--xip" flag. Known issues: there might still be some relocations in the text section which access the ".rodata" like sections.
And also enable ARC target support for both interpreter mode and AOT mode.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Implement wasm_runtime_init_thread_env() for Windows platform by calling os_thread_env_init(): if current thread is created by developer himself but not runtime, developer should call wasm_runtime_init_thread_env() to init the thread environment before calling wasm function, and call wasm_runtime_destroy_thread_env() before thread exits.
And clear compile warnings for Windows platform, fix compile error for AliOS-Things platform
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Enable to build wamrc with custom llvm, enable to auto detect processor on apple silicon, and fix some compile warnings.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Enable RISCV AOT support, the supported ABIs are LP64 and LP64D for riscv64, ILP32 and ILP32D for riscv32.
For wamrc:
use --target=riscv64/riscv32 to specify the target arch of output AOT file,
use --target-abi=lp64d/lp64/ilp32d/ilp32 to specify the target ABI,
if --target-abi isn't specified, by default lp64d is used for riscv64, and ilp32d is used for riscv32.
Signed-off-by: Huang Qi <huangqi3@xiaomi.com>
Co-authored-by: wenyongh <wenyong.huang@intel.com>
And add wasm_engine_new_with_args() declaration in wasm_c_api.h
Fix wasm-c-api frame func_offset issue in fast interp mode
Remove sanitize compiler flag in product-mini linux CMakeLists.txt
And enable to cache compiled AOT file buffer for wasm-c-api JIT mode
Avoid checks that rely on undefined C behavior
Fix issues of wasm-c-api sample trap and callback_chain
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
And enable to copy back the return value of wasm main function when calling wasm_application_execute_main, add license headers in wasm-c-api samples, fix several issues reported by klocwork.
And fix libc-builtin print float issue
Add a list to track all third party components
Fix compile error when MEMORY_TRACING is enabled
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Implement Windows thread/mutex/cond related APIs to support Windows multi-thread feature
Change Windows HW boundary check implementation for multi-thread: change SEH to VEH
Fix wasm-c-api issue of getting AOTFunctionInstance by index, fix wasm-c-api compile warnings
Enable to build invokeNative_general.c with cmake variable
Fix several issues in lib-pthread
Disable two LLVM passes in multi-thread mode to reserve volatile semantic
Update docker script and document to build iwasm with Docker image
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Implement more wasm-c-api APIs to support Envoy integration:
- sync up with latest c-api definition
- change CMakeLists to export necessary headers and install the static library of iwasm
- enable to export tables and memories
- support memorytype and tabletype APIs
- update wasm-c-api sampels
- enable to export importtype APIs
And refine bazel scripts for sample XNNPACK workload, add license headers for sample simple.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Implement spec reference-types proposal for interpreter, AOT and JIT, update documents and add sample. And upgrade AOT_CURRENT_VERSION to 3 as AOT file format and AOT module instance layout are changed.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Implement Windows PE file relocation type IMAGE_REL_AMD64_ADDR64/ADDR32/REL32, implement relocation for symbol "__xmm@xxx"/"__plt@xxx"/".rdata", implement Windows invokeNative simd asm code and enable SIMD by default for windows platform. Also update wamrc tool.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Remove check for heap_size==0 when creating wasi ctx, as the related data structures are allocated from global heap instead of app heap now, so it also works when app heap isn't created.
Also add v128 type for Windows so as to fix wamrc compilation error in Windows platform.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
And add native symbol node to list head when registering native symbol, so as to lookup developer's registered node firstly when linking.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
In some platforms, allocating memory with size 0 may return NULL but not an empty memory block, which causes runtime load, instantiate or execute wasm/aot file failed. We add checks to try to avoid allocating memory in runtime if the size is 0. And in wasm_runtime_malloc/free, output warning if allocate memory with size 0 and free memory with NULL ptr.
Also fix some coding style issues, fix handle riscv32 ilp32d issue, and fix several wasm-c-api issues.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
And remove redundant FAST_INTERP macros in wasm_interp_fast.c, and fix wamrc --help wrong line order issue.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Re-implement aot call_indirect opcode translation: when calling non-import function, translate it by LLVM call IR to call the function in AOTed code, so as to avoid calling runtime aot_call_indirect API which is much slower. For import function, keep calling aot_call_indirect API due to the possible pointer/string argument conversion.
And add prompt info while app heap is corrupted, change emit_leb to emit_uint32 inter fast-interp to refine footprint.
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
Update wasm app build scripts for wasi-sdk-12.0: add --export=__main_argc_argv, remove --no-threads
Lookup function with name "__main_argc_argv" as main function besides "main"
Change module_malloc to runtime_malloc in wasi native lib
Refine classic interpreter op_block and op_br_table
Refine faster interpreter op_br_table
Signed-off-by: Wenyong Huang <wenyong.huang@intel.com>
add more checks to enhance security
clear "wasi proc exit" exception before return to caller in wasm/aot call functions
fix memory profiling issue
change movdqa to movdqu in simd invokeNative asm codes to fix issue of unaligned address access
move setjmp/longjmp from libc-builtin to libc-emcc
fix zephyr platform compilation issue in latest zephyr version
